Suburbs we cover here: Phoenix Industrial Park, La Lucia, Umhlanga, Glen Ashley
Mount Edgecombe is estate territory. The estates run tight architectural guidelines, and a garage door that does not match the approved finish will not get past the aesthetics committee, whatever it cost.
What we see in Mount Edgecombe
The work here is as much paperwork as steel. Each estate has a specification for door style, colour and sometimes slat profile, and the approval has to be in hand before anything is manufactured. We have had doors rejected on colour alone.
So we survey, produce a spec sheet with the finish reference on it, and submit it for approval before we cut anything. It adds a week at the front and saves a rebuild at the back. The estates also set contractor hours and access procedures, and we book to those.
Getting on site
Access on the coastal strip is usually straightforward but the parking is not, and on the complexes and estates it has to be arranged rather than assumed. We confirm gate access, contractor hours and where the vehicle can stand before the day, so the team is not sitting at a boom while the install window closes. Where a body corporate needs the specification approved first we submit it and wait rather than turning up with a door nobody signed off.
Motors, backup and load shedding
Motors near the sea fail for one of two reasons: salt in the housing or a board that has been sitting in damp air. We fit the head unit where it is sheltered, seal the housing and use a sealed control box rather than an open one. Every install includes a battery backup sized to get the door up and down through a full load shedding block, because a coastal home with no way out of the garage is a genuine problem, not an inconvenience.
Repairs on any make
We repair any make, including doors we did not build. On this strip the first question is always whether the corrosion has reached the structure or only the finish. If it is the finish, we can strip, treat and recoat and you get years out of it. If the guides or the bottom rail have gone through, we say so, because a cosmetic repair on corroded steel simply fails again by the next winter and you have paid twice.
What it costs
We quote Mount Edgecombe jobs off a free measured survey, itemised so you can see what the door, the motor and the installation each cost, and fixed in writing before anything is manufactured. We do not quote a range over the phone and then adjust it on site, because that is not a price, it is a deposit.
How soon we can be there
Surveys in Mount Edgecombe are normally within one working day and quotes follow the same day the survey is done. Manufacture depends on the door, and we give you a real date rather than an optimistic one. Breakdowns are attended same-day wherever we can reach you.
Getting a quote
Send us the opening, or ask for a survey and we will come and measure it. Either way you get an itemised written price for your Mount Edgecombe door, valid as quoted, with no charge for the visit.
Roller shutter and industrial door services in Mount Edgecombe
Roller Shutter Doors in Mount Edgecombe
We build roller shutter doors for Mount Edgecombe openings of every size, from small shopfront curtains to wide vehicle bays, each one made to the surveyed opening.
Roller Shutter Door Installation in Mount Edgecombe
Our own teams install in Mount Edgecombe — we do not subcontract, which is why the people who fit the door are the people who come back to it.
Roller Shutter Door Repairs in Mount Edgecombe
We repair roller shutter doors throughout Mount Edgecombe on any make — bent slats, seized guides, failed bearings and motors that have given up.
Roller Door Repairs in Mount Edgecombe
Roller door repairs in Mount Edgecombe are usually a fraction of a replacement, and we will tell you plainly when a curtain has gone past economic repair.
Industrial Roller Shutter Doors in Mount Edgecombe
Industrial roller shutter doors for the wide vehicle openings in Mount Edgecombe, built to the measured span with commercial-duty gear.
Industrial Roller Shutter Door Repairs in Mount Edgecombe
Industrial doors in Mount Edgecombe fail from impact and duty cycle more than age, and both are repairable — we carry bearings, guides, springs and cables on the van.
Roller Shutter Door Manufacturers in Mount Edgecombe
Because we manufacture rather than import and resell, Mount Edgecombe customers get doors made to their opening and spares that still fit a decade on.
Industrial Door Manufacturers in Mount Edgecombe
Industrial doors for Mount Edgecombe are cut, rolled and assembled at our own works, which is why we can tell you exactly what went into one three years later.
Industrial Door Repairs in Mount Edgecombe
We repair industrial doors of any make in Mount Edgecombe, and will quote a repair against a replacement honestly rather than defaulting to the bigger invoice.
Roller Shutter Door Servicing in Mount Edgecombe
Scheduled servicing in Mount Edgecombe covers guides, bearings, spring tension, seals, fixings and the motor safety systems, with a written report per door.
Emergency Roller Shutter Door Repairs in Mount Edgecombe
Emergency callouts in Mount Edgecombe are attended around the clock — our teams are local, so it is a short run rather than a scheduled visit.
Need a door in Mount Edgecombe?
Send the opening size and your suburb. A consultant calls you back, usually within two working hours — or call the standby number if the door has already stopped.
What customers say
Reviews from Mount Edgecombe and nearby
Handled professionally from start to finish
Excellent service from start to finish. RDSA installed our new roller shutter door and the whole process was handled professionally. The door looks great and works perfectly.
Verified customervia Google
They clearly knew what they were doing
RDSA fitted roller shutter doors at our commercial property. The team was professional, efficient and clearly knew what they were doing.
Verified customervia Google
Noisy door fixed properly
Highly recommended for garage door repairs. Our door was making a terrible noise and struggling to open. RDSA identified the issue and fixed it properly.
Verified customervia Google
Our work
Doors we have built and fitted
Common questions
Roller doors in Mount Edgecombe
Not usually. A standard powder-coated door over untreated steel will look fine for a season or two in Mount Edgecombe and then start lifting, and the corrosion is already under it by the time you can see it. For anything within a couple of kilometres of the water we build in hot-dip galvanised steel or aluminium with a marine-grade finish, and we seal the motor housing. It costs more at install and it is the reason the door is still working in year ten.
Yes, and we would rather do the paperwork first. Send us the architectural guideline or the approved colour reference and we will produce a spec sheet for your Mount Edgecombe door before anything is manufactured, so it goes to the committee for approval rather than to your driveway for rejection. We have seen doors turned down on colour alone, and a rebuild is a great deal more expensive than a week of waiting.
Usually not. On the coast a door that binds is nearly always corrosion in the guides or at the fixings, and the motor is simply working harder to drag it through. If you replace the motor without dealing with the guides you will be replacing it again. We will come and look, tell you which it is, and quote the actual fault rather than the symptom.
Related
Also worth a look
Roller Shutter Doors Musgrave
Medical suites, small offices and secure parking
Roller shutter doors, garage doors and industrial shutters manufactured at our own works and installed across Musgrave by our own teams.
Roller Shutter Doors New Germany
Industrial units and family homes side by side
Roller shutter doors, garage doors and industrial shutters manufactured at our own works and installed across New Germany by our own teams.
Roller Shutter Doors Phoenix Industrial Park
Manufacturing units, textiles and hard daily use
Roller shutter doors, garage doors and industrial shutters manufactured at our own works and installed across Phoenix Industrial Park by our own teams.